To introduce forces to measuring equipment, load cells need suitable supports. They must ensure the central, axial and torque-free introduction of forces into the running axles. Different supports are used to prevent traverse or lateral forces.

Incidentally, the supports listed here differ from the typical supports used for example in buildings constructions. Standard supports such as fixed bearings, tilt bearings and joint bearings are not suitable as load cell bearings. These supports may only be used to additionally secure the container in the case of simple measurements.

The field of application of the load cell bearings is far more complex. In simple terms, they enable, for example, the weighed system to be moved horizontally.

This movement is limited to a permissible horizontal displacement in each case. Depending on the permissible horizontal displacement, different support variants are used and include elastomer mounts, pendulum mounts, multi-ball bearings and supports with a conical tip/seat.

We’re there for you

Partnership for us means always being on hand to support you whenever and wherever you need us. With our global network of locations and expert partners, we make sure we are always right by your side.

Find your
nearest expert

Get the local support you need

Search now

Service
inquiries

Got a challenge, a question or some feedback for us?

Get in touch

Your Service
Hotline

Need some urgent help? We’re here for you 24/7

Contact us now