The Horizontal Material Separator (HMS) cyclone separates conveyed material from the conveying airstream, minimizing the amount of air that exits with discharge material. The horizontal cyclone design is similar to a standard cyclone however; the main housing unit is turned 90° with both cylinder ends capped. Functionality of the HMS is also proven to have comparable efficiencies to a standard cyclone. Testing has confirmed that minimal carryover takes place while conveying with an HMS. The HMS is ideal for handling large and small kibble, large flakes and fish feed.
Features
• Interior product contact welds ground smooth to resist buildup, free of cracks and crevices
• Exterior welds are continuous, cleaned of weld slag and splatter, and sealed from harmful contaminants
• Tool free access door located on opposite end of inlet makes operation easy and safe
Materials of Construction
• Housing and hopper: 10 gauge stainless steel construction
• Full welded exterior and interior
• Housing/Hopper/Tangential: fully welded on outside and inside
• Exhaust: 10 gauge or Schedule 10 pipe, stainless steel construction
Major Components
• Combination lift lugs and mount (4 each)
• Tangential inlet-diffuser
• Housing
• Hopper
• Flanged product discharge
• Horizontal exhaust
Options
• 304 or 316 stainless steel construction or carbon steel
• Inlet: Tube or Schedule 10 pipe
• Clockwise or counterclockwise tangential inlet (as viewed from exhaust)
• Extended wear housing (standard housing is 10 gauge, extended wear is 0.25” thick)
• Small or large product outlet
• Hinge location – Access door: left or right
Downloads
Data sheets
Brochures
We’re there for you
Partnership for us means always being on hand to support you whenever and wherever you need us. With our global network of locations and expert partners, we make sure we are always right by your side.
