Cement Mixing and Blending
“Two in one”
The process can however be simplified considerably if MULTICOR® S is used as the master for the main component, supplemented by suitable feeding systems (as slaves) for additives.
Mixing according to the “less is more” principle
A rotating measuring wheel mixes the main components and additives directly in the MULTICOR® S master according to the Coriolis principle. No separate mixer is required, and any mixture can be produced. This saves costs that would otherwise be incurred by using intermediate transport technology and silos.
Bagging plant
This has a total feed rate of approximately 40 t/h: MULTICOR® S is used to feed the main cement component and for the mixture. MechaTron ® is used for the additional feeding of the kiln dust.
Cement loading
This has a total feed rate of approximately 150 t/h – 300 t/h: MULTICOR® S is used to feed the main cement component and for both the mixture and the additional feeding of additives.
Save and utilise added value
Produce “just in time”. Any ratio of components is possible. The highest accuracy and feeding constancy is ensured thanks to MULTICOR ® S, supplemented by cutting-edge process-adaptive measuring and control technology from a single source.
| Etc | Products |
